YX5300¶

Introduction¶

Specifications:

Play mp3 or wav

Wiring¶

ESP                   S8
GPIO (X)       <-->   RX


Power
5.0V or 3.3V   <-->   VCC
GND            <-->   GND

Commands available¶

Command	Extra information
`play,<number>` Example: `play,12` to play the 12th track available on the SD card.	Starts playing the nth file on the SD-card. Acceptable numbers 0..2999.
`stop`	Stops playing the current file immediately.
`vol,<volume>` Example: `vol,15`	Change the playback volume to the set level. Acceptable values 1..30. When 0 (or no argument) is provided, the max. volume will be set! Volume is also stored in the settings, but not saved untile either a `save` command is used, or the settings of the device is saved from the web interface.
`eq,<type>` Example: `eq,4`	Select the equalizer configuration. Acceptable values 0..5. 0 = Normal 1 = Pop 2 = Rock 3 = Classic 4 = Jazz 5 = Base
`mode,<mode>` Example: `mode,3`	Select the playback mode. Acceptable values 0..3. 0 = Repeat 1 = Folder repeat 2 = Single repeat 3 = Random NB: To have actual repeat playing a track, the `repeat` command should also be enabled. NB2: This command does not work on all players, it may start a `play,<mode>` with repeat enabled instead. That seems hardware related.
`repeat,<0\|1>` Example: `repeat,1`	To set repeat mode. Default is off, acceptable values 0 or 1. 0 = Off 1 = On

Command

Extra information

play,<number>

Example:

play,12 to play the 12th track available on the SD card.

Starts playing the nth file on the SD-card. Acceptable numbers 0..2999.

stop

Stops playing the current file immediately.

vol,<volume>

Example:

vol,15

Change the playback volume to the set level. Acceptable values 1..30. When 0 (or no argument) is provided, the max. volume will be set!

Volume is also stored in the settings, but not saved untile either a save command is used, or the settings of the device is saved from the web interface.

eq,<type>

Example:

eq,4

Select the equalizer configuration. Acceptable values 0..5.

0 = Normal

1 = Pop

2 = Rock

3 = Classic

4 = Jazz

5 = Base

mode,<mode>

Example:

mode,3

Select the playback mode. Acceptable values 0..3.

0 = Repeat

1 = Folder repeat

2 = Single repeat

3 = Random

NB: To have actual repeat playing a track, the repeat command should also be enabled.

NB2: This command does not work on all players, it may start a play,<mode> with repeat enabled instead. That seems hardware related.

repeat,<0|1>

Example:

repeat,1

To set repeat mode. Default is off, acceptable values 0 or 1.

0 = Off

1 = On

Where to buy¶

Store	Link
AliExpress	Link 1 ($)

$ = affiliate links which will give us some money to keep this project running, thank you for using those.